Plan for east- and westbound lane restrictions on I-10 in Tonopah beginning May 4

Learn more

Drivers should plan for daytime restrictions and allow extra travel time

The Arizona Department of Transportation advises drivers to plan for east- and westbound lane restrictions on Interstate 10 in Tonopah beginning Sunday, May 4, for milling and paving.

The following restrictions will occur nightly from 7 p.m. to 6 a.m. beginning Sunday, May 4, and ending the morning of Friday, May 9:

East- and westbound I-10 between Salome Road and Tonopah (milepost 90) will be reduced to one lane. Note: Only one direction will be impacted at a time. Motorists should anticipate a 2 to 3-mile lane restriction while crews progress through the work zone.
A 12-foot vehicle width restriction will be in place.
The speed limit will be reduced to 55 mph.

The following daytime restrictions will occur from 7 a.m. to 4 p.m. beginning Monday, May 5, and ending Friday, May 9:

Westbound I-10 will be reduced to one lane between Salome Road (milepost 80) and Tonopah (milepost 90) for guardrail installation. Note: Motorists should anticipate a 2 to 3-mile lane restriction- while crews progress through the work zone.
A 12-foot vehicle width restriction will be in place.
The speed limit will be reduced to 55 mph.

The following overpass restrictions will continue 24 hours a day, seven days a week through the end of May:

The north- and southbound Salome Road overpass will be reduced to one lane with alternating traffic control via a temporary signal.
An 11-foot vehicle width restriction will be in place.
The speed limit will be reduced to 25 mph.

Drivers should plan for delays, obey posted speed limits and traffic control devices and use caution around construction personnel.

Show less

Interstate 10, Salome Road to Tonopah Pavement Rehabilitation

Overview
Project Fact Sheet
Project Area
Project Elements
Project Schedule
Stay Informed

Overview

The Arizona Department of Transportation and the Federal Highway Administration (FHWA) is scheduled to begin a project to repair the pavement on Interstate 10 between Salome Road (milepost 80) and Tonopah (milepost 90) began in late March 2025.

The work consists of removing the existing pavement surface and replacing it with new asphalt concrete and other related work.

Project Fact Sheet

Fact Sheet (English)

Fact Sheet (Spanish)

Project Area

Click to enlarge map.

Project Elements

Milling the existing pavement and replacing it with new asphalt.
Replacing guardrail and guardrail end terminals
Constructing drainage facilities
Bridge repairs and replacement of concrete bridge barrier
Replacing pavement markings, signage, and fencing

Project Schedule

Construction began in late March 2025 and is expected to take 11 months to complete.
To minimize traffic impacts, milling and paving work is tentatively scheduled to occur from 7 p.m. to 6 a.m. on weekdays. Other related work will take place during the day, which will require lane restrictions.

Stay Informed

Schedules are subject to change based on weather and other unforeseen factors. Subscribe to receive project updates and traffic alerts by email. For more information, please call the ADOT Bilingual Project Information Line at 855.712.8530 or at [email protected]. For real-time highway conditions statewide, visit ADOT’s Traveler Information Site at www.az511.gov, follow ADOT on Twitter (@ArizonaDOT) or call 511, except while driving.

Pursuant to Title VI of the Civil Rights Act of 1964, the Americans with Disabilities Act (ADA) and other nondiscrimination laws and authorities, ADOT does not discriminate on the basis of race, color, national origin, sex, age, or disability. Persons that require a reasonable accommodation based on language or disability should contact Stephanie Dyer at [email protected] or 855.712.8530. Requests should be made as early as possible to ensure the State has an opportunity to address the accommodation.