Why aren't the bridges on the new freeway paved with rubberized asphalt?

ADOT no longer paves its highway bridges with rubberized asphalt. This is because the rubberized asphalt must be removed and replaced each time a bridge needs to be inspected or if a repair must be made. By not paving bridges with rubberized asphalt, ADOT reduces costs, as well as the need to close or restrict freeways for asphalt removal or replacement. And because rubberized asphalt is a temperature-sensitive product, bridges could be repaved only during optimal conditions that occur twice a year (spring and fall).

Will the freeway include rubberized asphalt?

Rubberized asphalt has been used on the SMF to provide a smooth driving surface. It has the added benefit of reducing noise levels by up to four decibels. This material—used for more than 20 years to resurface highways and city streets in Arizona—consists of regular asphalt pavement mixed with recycled rubber tires. In addition to the benefits it provides on the roadway, rubberized asphalt also reduces the number of used tires in landfills. Final rubberized asphalt paving will occur in the spring of 2020.

Why isn't there a noise wall near my community?

Noise walls were built in locations that warranted noise mitigation in compliance with state and federal regulations based on noise modeling completed prior to construction. ADOT will continue to measure noise levels along the entire freeway corridor to evaluate impacts and ensure that noise levels remain at or below what is permitted by state and federal regulations. ADOT’s policy is to reduce the impact of freeway noise on adjacent homes, schools and churches by building sound walls or berms.

What is a half diverging diamond interchange?

A Diverging Diamond Interchange (DDI) is based on a standard diamond interchange common in Arizona, but with one major difference —traffic shifts briefly on the left side of the road between highway ramps, allowing left turns without crossing oncoming traffic. The freeway will feature two half-DDIs in the Pecos Segment, as there are no connection points to the south. Features of a DDI:

What is a shared-use path and where will it be located?

A shared-use path is a physically separated path adjacent to a highway. It accommodates pedestrians, bicyclists and other forms of non-vehicular traffic. The 20-foot wide shared-use path is being constructed between 40th Street and 17th Avenue directly south of the freeway in the Pecos Segment. While C202P is responsible for the design and construction of the shared-use path, the city of Phoenix will be responsible for maintaining the path. Additionally, the shared-use path will provide connectivity complementing the city of Phoenix Comprehensive Bicycle Master Plan.

How were traffic interchange locations determined?

Interchange locations were determined during the environmental phase of the project, based on traffic modeling and regional mobility needs. During this process, ADOT coordinated with the city of Phoenix and a Citizens Advisory Team to identify interchange locations. Initially, interchanges were not planned for 32nd Street and Vee Quiva Way. The interchanges were added to the project after construction began in 2016 at the request of area residents, businesses and other key stakeholders and following a re-evaluation of the environmental study.

What has changed about the project since the environmental process and why?

Since the P3 method encourages innovation and optimization of efficiencies, the current freeway design incorporates some changes from the early design concepts that minimize the right of way impacts while increasing safety and reducing traffic restrictions during construction. Innovation and efficiency examples throughout the freeway corridor include:

Half diverging diamond interchanges at Desert Foothills Parkway and 17th Avenue

Modifying interchanges to improve traffic operations and minimize right of way requirements